AUDIX D2 Hypercardioid Dynamic Instrument Microphone
AUDIX D2 Hypercardioid Dynamic Instrument Microphone
The D2 dynamic instrument microphone is used for stage, studio, and broadcast applications. It is designed with a hypercardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
The D2 is an excellent choice for miking instruments with a percussive nature such as rack toms, congas, saxophones, guitar cabinets, and brass. Transformerless design, low impedance, and balanced output insure that the D2 hypercardioid instrument microphone will perform interference-free.
Designed, machined, assembled, and tested by Audix in the USA.
Features:
- Instrument Dynamic
- Hypercardioid pattern
- 144dB SPL
- Proprietary anti-feedback design
- Durable scratch resistant spring steel grille
- Black Hard-coat Finish
- Isolates each instrument's "sweet" spot
- Gold plated contacts
- VLM Very low mass diaphragm
- Reduced phase shift
- Superior transient response
- Pouch & clip included
- Application specific microphones
- Individually tested & hand assembled
- Highest levels of gain before feedback
- Exceptional off-axis rejection
- Built to last a lifetime
What is in the box:
1x D2 Instrument Microphone
1x DCLIP Microphone Clip
1x P1 Carrying Pouch
Transducer Type | Dynamic |
Frequency Response | 68 Hz – 18 kHz |
Polar Pattern | Hypercardioid |
Output Impedance | 280 ohms |
Sensitivity | 1.2 mV / Pa @ 1k |
Capsule Technology | VLM Type B |
Off-Axis Rejection | >30 dB |
Maximum SPL | ≥144 dB |
Power Requirements | None |
Connector | 3-pin XLRm |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
Materials / Finish | Black Hard Coat |
Weight | 128 g / 4.5 oz |
Length | 100 mm / 3.9 in |