Radial Engineering ProD2 2-ch Passive DI
| Quantity: | |
If we do not have the full amount that you ordered of this item: |
|
|
|
|
Add to Cart | |
* some exceptions on specially discounted items or oversized items.
(see our shipping policy)
SKU# ProD2
The ProD2 is a 2-channel passive direct box designed to connect stereo keyboards or high output instruments to a PA system or home recording setup without noise or distortion.
|
|||||||||
World class DIAt the heart of the design are two high performance Eclipse™ ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops. |
![]() |
![]() |
![]() |
![]() |
|||||||
ProD2 with Stereo KeyboardThe ProD2 is designed for stereo devices like keyboards. Simple, straight ahead hookup makes it easy to connect your keys to your recording system for great stereo sound! |
ProD2 with InstrumentsTwo Radial ProDI direct boxes in one, multi instrumentalists rejoice! The ProD2 is perfectly well suited for bass, acoustic guitar or just about any instrument with a pickup. |
ProD2 with Drums & SamplersDriving the output from a sampler or electronic drum machine to the PA system has never been easier. The ProD2 delivers plenty of headroom and lets you connect a local DJ mixer too. |
![]() |
| Specifications | ||
|---|---|---|
| Audio circuit type: | Passive, transformer based | |
| Transformer: | Eclipse ET-DB2, 12:1 ratio | |
| Number of channels: | 2 | |
| Frequency response: | 20Hz ~ 18.5KHz (± 0.2dB) | |
| Dynamic range: | 128dB | |
| Total harmonic distortion: | 0.01% from 20Hz~20kHz @-10dB | |
| Phase Deviation: | 1° @ 100Hz; 8° @ 20Hz | |
| Input Impedance: | 140k Ohms, unbalanced | |
| Output Impedance: | 150 Ohms, balanced | |
| Maximum Input: | +18dB @ 20Hz | |
| Features | ||
| Input pad, Ground lift | ||
| Input Connectors: | 1/4" | |
| Output Connectors: | XLR, 1/4" thru | |
| General | ||
| Construction: | 14 gauge steel chassis & outer shell | |
| Size (L x W x D): | 5" x 3.3" x 1.8" (127mm x 84.1mm x 45.5mm) | |
| Weight: | .54kg (1.2lbs) | |
| Shipping size (L x W x D): | 6.5" x 4" x 3" (165mm x 102mm x 76mm) | |
| Shipping weight: | 0.61 kg (1.35 lbs) | |
| Power: | Passive, no power required | |
| Conditions: | For use in dry locations only between 5°C and 40°C | |
| Warranty: | Radial 3-year, transferable | |





