AUDIX i5 all-purpose dynamic cardioid instrument microphone
Quantity: | |
If we do not have the full amount that you ordered of this item: |
|
|
|
Add to Cart |
SM Hanson Savings $ 20.00
MSRP is $ 119.00 - This mic is made in the USA
MSRP is $ 119.00 - This mic is made in the USA
Free Economy Standard Ground Shipping on purchases over $ 50.00
* some exceptions (see our shipping policy)
* some exceptions (see our shipping policy)
AUDIX i5 all-purpose dynamic cardioid instrument microphone
What is in the Box:
1x i5 Instrument Microphone
1x MC1 Microphone Clip
1x P1 Carrying Pouch
Designed with a cardioid pickup pattern for isolation and feedback control, the i5 all-purpose dynamic instrument microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction. The i5 is used for stage, studio, and broadcast applications and is able to handle SPLs in excess of 140 dB without distortion.
The i5 cardioid microphone can be used to microphone a wide variety of musical instruments, guitars, and bass cabinets as well as vocals and speech. The i5 instrument microphone is sturdy, compact, and easy to position. With a wide frequency response of 50 Hz – 16 kHz, the i5 provides clear sound reproduction without having to rely on EQ.
Designed, assembled, and tested by Audix in the USA.
Features:
- Built tough for road use
- Perfect for all kinds of instruments and amps
- Flat cap design perfect for close-miking instruments and cabinets
- SPL handling: 140dB
- Type: Dynamic mic
- Polar pattern: Cardioid
- Frequency Response: 50Hz-16kHz
- Impedance: 150 ohms
- Sensitivity: @1k 1.5 mV/Pa
What is in the Box:
1x i5 Instrument Microphone
1x MC1 Microphone Clip
1x P1 Carrying Pouch
Transducer Type | Dynamic |
Frequency Response | 50 Hz – 16 kHz |
Polar Pattern | Cardioid |
Output Impedance | 280 ohms |
Sensitivity | 1.6 mV / Pa @ 1k |
Capsule Technology | VLM Type B |
Off-Axis Rejection | >23 dB |
Maximum SPL | ≥140 dB |
Power Requirements | None |
Connector | 3-pin XLRm |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
Materials / Finish | Zinc Alloy / Black Finish |
Weight | 248 g / 8.7 oz |
Length | 141 mm / 5.6 in |