AUDIX M1255B M1255B Miniature High-Output Cardioid Condenser - Open Box
AUDIX M1255B Miniature High-Output Cardioid Condenser - Open Box
Miniaturized High Output Condenser Microphone for Distance Miking
The M1255B is a miniaturized condenser microphone with a fully integrated preamp, detachable cable, and is designed with very high sensitivity for distance miking. Applications include ceiling mount or table mount for conferencing, hanging choir miking, location recording, audience, or room miking. The M1255B has complete immunity from RF interference caused by cell phones and GSM devices. The M1255B is equipped with a cardioid capsule and is also available with hypercardioid, omni, or shotgun capsules. The microphone has the unique ability to be used in a wide variety of stage, studio, and broadcast applications. The M1255B is available with a wide array of clips and accessories for musical instruments, overhead stage miking, podiums, conferences, and presentations.
Designed, machined, assembled, and tested by Audix in the USA.
1x M1255B Miniaturized Condenser Mic
1x CBLM25 25′ Cable With Mini-XLRf to XLRm Connectors
1x MCMICRO Mic Stand Adapter (not available with models in white)
1x MCHANGER Hanging Clip
1x WS1218 External Windscreen
Transducer Type | Condenser |
Frequency Response | 50 Hz – 19 kHz |
Polar Pattern | Cardioid, Hypercardioid, Omni, Shotgun |
Output Impedance | 150 ohms |
Sensitivity | 38 mV (C), 32 mV (HC) 40 mV (O), 60 mV (S) / Pa @ 1k |
Equivalent Noise Level | 21 dB (A-weighted) |
Signal to Noise Ratio | 73 dB |
Maximum SPL | ≥130 dB |
Power Requirements | 18 – 52 V |
Connector | 3 pin mini-XLRm |
Materials / Finish | Machined brass / Black or White Finish |
Weight | 16 g / 0.56 oz |
Length | 54 mm / 2.1 in |