Skip Navigation Website Accessibility
 

Audio-Technica ATW-1301/L System 10 PRO Digital Wireless Bodypak with lavalier mic

   
Quantity:    

If we do not have the full amount that you ordered of this item:    
 

Add to Cart
Free Economy Standard Ground Shipping on purchases over $ 50.00
* some exceptions (see our shipping policy)
Audio-Technica ATW-1301/L System 10 PRO Digital Wireless System includes:
ATW-RC13 rack-mount receiver chassis, ATW-RU13 receiver unit, ATW-T1001 UniPak transmitter and MT830cW lavalier microphone

The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two transmitters. Transmitter options include the ATW-T1001 cW-style body-pack transmitter, ATW-T1002 handheld transmitter,, ATW-T1006 boundary microphone/transmitter, ATW-T1007 microphone desk stand transmitter. Both the receiver chassis and transmitters feature easy-to-read displays.

Overall System
Operating Frequencies 2.4 GHz ISM band (2400 to 2483.5 MHz)
Frequency Response 20 Hz to 20 kHz
Depending on microphone type
Operating Range 60 m (200') Open range env. with no interfering signals
Total Harmonic Distortion <0.05% typical
Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Body Pack
RF Power Output 10 mW
Battery Life >7 hours (alkaline)
Depending on battery type and use pattern
Battery Type Two 1.5V AA
not included
Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Input Connections Four-pin Locking Connector
Pin 1: GND, Pin 2: INST INPUT,
Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Net Weight 100 grams (3.5 oz)
without batteries
Spurious Emissions Following federal and national regulations
Receiver
Receiving System Diversity (frequency/time/space)
Maximum Output Level XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Operating Temperature Range 40° F (4° C) to 110° F (43° C)
Dimensions 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
Weight 940 grams (33.2 oz)
Accessories Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
Output Connector Remote Receiver Connector: RJ45
Link Connector: RJ12