Audio-Technica ATW-1301 System 10 PRO Bodypak Digital Wireless System
Quantity: | |
If we do not have the full amount that you ordered of this item: |
|
|
|
Add to Cart |
Free Economy Standard Ground Shipping on purchases over $ 50.00
* some exceptions (see our shipping policy)
* some exceptions (see our shipping policy)
Audio-Technica ATW-1301 System 10 PRO Digital Wireless System includes:
ATW-RC13 rack-mount receiver chassis, ATW-RU13 receiver unit and ATW-T1001 UniPak transmitter.
Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.
The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.
ATW-RC13 rack-mount receiver chassis, ATW-RU13 receiver unit and ATW-T1001 UniPak transmitter.
Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.
The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.
Anywhere Wireless - Global, Interference-Free Operation
Operating in the 2.4 GHz range (outside TV bands), System 10 PRO is the wireless system you can use anywhere- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- Operates in the 2.4 GHz range – completely free from TV interference
- Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
- Up to five chassis (ten receiver units) can be linked and used simultaneously
- Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
- Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and setup
- Three levels of diversity assurance: frequency, time & space
- Ground-lift switch helps eliminate audible hum caused by ground loop
Overall System | |
---|---|
Operating Frequencies | 2.4 GHz ISM band (2400 to 2483.5 MHz) |
Frequency Response | 20 Hz to 20 kHz Depending on microphone type |
Operating Range | 60 m (200') Open range env. with no interfering signals |
Total Harmonic Distortion | <0.05% typical |
Operating Temperature Range | 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures |
Handheld Transmitter | |
RF Power Output | 10 mW |
Spurious Emissions | Following federal and national regulations |
Battery Type | Two 1.5V AA not included |
Battery Life | >7 hours (alkaline) Depending on battery type and use pattern |
Dimensions | 254.8 mm (10.03") long, 50.0 mm (1.97") diameter |
Net Weight | 280 grams (9.9 oz) without batteries |
Accessories Included | AT8456a Quiet-Flex™ stand clamp |
Body Pack | |
RF Power Output | 10 mW |
Battery Life | >7 hours (alkaline) Depending on battery type and use pattern |
Battery Type | Two 1.5V AA not included |
Dimensions | 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D |
Input Connections | Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
Net Weight | 100 grams (3.5 oz) without batteries |
Spurious Emissions | Following federal and national regulations |
Receiver | |
Receiving System | Diversity (frequency/time/space) |
Maximum Output Level | XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV |
Power Supply | 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external |
Operating Temperature Range | 40° F (4° C) to 110° F (43° C) |
Dimensions | 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D |
Weight | 940 grams (33.2 oz) |
Accessories Included | AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet |
Output Connector | Remote Receiver Connector: RJ45 Link Connector: RJ12 |