AUDIX D4 Hypercardioid Dynamic Instrument Microphone
| Quantity: | |
If we do not have the full amount that you ordered of this item: |
|
|
|
|
Add to Cart | |
SM Hanson Savings $ 38.00
MSRP $ 227.00
MSRP $ 227.00
Free Economy Standard Ground Shipping on purchases over $ 50.00
* some exceptions on specially discounted items or oversized items.
(see our shipping policy)
* some exceptions on specially discounted items or oversized items.
(see our shipping policy)
AUDIX D4 Hypercardioid Dynamic Instrument Microphone
Features:
What is in the Box:
1x D4 Instrument Microphone
1x DCLIP Microphone Clip
1x P1 Carrying Pouch
With a wide frequency response of 40 Hz – 18 kHz and the ability to handle SPLs in excess of 144 dB, the D4 dynamic instrument microphone is an excellent choice for miking instruments requiring precise, low-frequency reproduction such as large rack toms, floor toms, cajon, djembe, tympani, leslie bottom, bass flute, saxophone and baritone saxophone, trombone, acoustic bass, bass cabinets, and small kick drums.
The D4 is lightweight, compact, and easy to position. Used for stage, studio, and broadcast applications, the D4 dynamic instrument microphone is designed with a hypercardioid pickup pattern for isolation and feedback control. The D4 hypercardioid is also equipped with a VLM™ diaphragm for natural accurate sound reproduction.
Designed, machined, assembled, and tested by Audix in the USAFeatures:
- Instrument Dynamic
- Hypercardioid pattern
- 144dB SPL
- Proprietary anti-feedback design
- Durable scratch resistant spring steel grille
- Black Hard-coat Finish
- Isolates each instrument's "sweet" spot
- Gold-plated contacts
- VLM Very low mass diaphragm
- Reduced phase shift
- Superior transient response
- Pouch & clip included
- Application specific microphones
- Individually tested & hand assembled
- Highest levels of gain before feedback
- Exceptional off-axis rejection
- Built to last a lifetime
What is in the Box:
1x D4 Instrument Microphone
1x DCLIP Microphone Clip
1x P1 Carrying Pouch
| Transducer Type | Dynamic |
| Frequency Response | 40 Hz – 18 kHz |
| Polar Pattern | Hypercardioid |
| Output Impedance | 280 ohms |
| Sensitivity | 1.4 mV / Pa @ 1k |
| Capsule Technology | VLM Type D |
| Off-Axis Rejection | >20 dB |
| Maximum SPL | ≥144 dB |
| Power Requirements | None |
| Connector | 3-pin XLRm |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
| Materials / Finish | Black Hard Coat |
| Weight | 128 g / 4.5 oz |
| Length | 100 mm / 3.9 in |
