String Swing CC01K-A Guitar Wall Mount for Acoustic & Electric Guitars | CC01K - Ash
String Swing CC01K-A Guitar Wall Mount for Acoustic & Electric Guitars | CC01K - Ash
Our best-selling guitar hanger is the original String Swing guitar hanger created back in 1983, with a few minor improvements. The new design, known as the “Guitar Keeper”, has a deep cradle design that prevents the guitar from being improperly placed into the hanger. This ultimately provides a safer hanger for your instrument, as the guitar needs to be lifted 2 inches and brought forward to be removed. The wood blocks that our guitar holders attach to are made of authentic North American hardwood that is handcrafted by local Amish. There are four species of hardwood available (Cherry, Oak, Ash and Black Walnut). Natural wood color may vary. The new Keeper design is great for guitars with single or uneven heels.The pivoting yoke allows for Bass, Electric and Acoustic guitar headstocks to be cradled perfectly while still hanging straight. This yoke may be too narrow for some classical and bass guitars, therefore we recommend purchasing the original CC01. The yoke that is included on this hanger is the SDY03. In this case, we recommend measuring the width of your guitar neck to choose the appropriate yoke.
We simply added a “K” (for Keeper) to the end of the original product code to distinguish between the original CC01 and CC01K.
This hanger is not best suited for Classical guitars but our original style CC01 is made just for classicals!
- Trusted by over 10 million guitars around the world and backed with a lifetime warranty.
- Mounting Hardware Included
Installation Instructions: Flat Wall: Choose location on the wall for hanger. Press screws through mounting holes of hanger into wall using a phillips screwdriver. If a wall stud is not found, these pilot holes are necessary for installing the drywall anchors. To do this, use the screwdriver to push and turn the toggle clockwise until flush. Remount hanger with screw into anchors. DO NOT REUSE ANCHORS. The weight limit for use of this hanger is 15lbs or less. Assembly Instructions: Insert the cradle into the threaded hole of the block. Turn it clockwise until snug, and the cradle arms point upward. The cradle width can be adjusted to fit your instrument. |
![]() |