Skip Navigation Website Accessibility
 


Bach 3D Classic Trumpet Silver Plated Mouthpiece

Bach 3D Classic Trumpet Silver Plated Mouthpiece
model # 3513D

Bach Standard Series mouthpieces are some of the most popular mouthpieces in the world among both students and professionals.

Vincent Bach was a rare combination of artist and engineer. A mechanical genius and acclaimed trumpet soloist, his instruments and mouthpieces are used today in every major studio and orchestra in the world. Bach personally designed the tools and composed the plans that continue to set the high standards for making all Bach products today.

"Choosing the perfect mouthpiece is often more difficult than choosing the perfect instrument. Your success as a musician depends on the choice of equipment that will do justice to your capabilities."

-Vincent Bach

The formalization of the 27 throat and backbore to cup letter (A=24, B=7, C= 10, etc.) created a standard for the mouthpiece making that is still used today. These standards are known today as the Classic Series.

3D Medium shallow 16.30mm Medium wide Fairly large, medium shallow cup produces a more brilliant tone. Facilitates high register.

Rim


Wide: Increases endurance
Narrow: Improves flexibility, range
Round: Improves comfort
Sharp: Increases brilliance, precision of attack

                  

Cup


Large: Increases volume, control
Small: Relieves fatigue, weakness
Deep: Darkens tone, especially in low register
Shallow: Brightens tone, improves response, especially in high register


Throat


Large: Increases blowing freedom, volume, tone; sharpens high register (largest sizes also sharpen low register)
Small: Increases resistance, endurance, brilliance; flattens high register

 

Backbore


Except in general terms, it isn’t possible to identify backbores by size because they also vary in shape. Various combinations of size and shape make the tone darker or more brilliant, raise or lower the pitch in one or more registers, increase or decrease volume. In each instance, the effect depends in part on the throat and cup used in combination with the backbore.


The playing qualities mentioned on this page are discussed in greater detail in the following sections. Keep in mind that playing qualities of mouthpieces vary from person to person; therefore, descriptions of playing qualities are necessarily subjective. It is important to view all information in this manual as a general guide. For best results, use it as a starting point for testing a number of models, not as a substitution for testing.

Model Numbers

Bach trumpet, cornet and fluegelhorn mouthpieces have been numbered in an orderly progression from the largest to the smallest diameters and from the deepest to the most shallow cup, each with a choice of rim designs.

Rim shape is described for each individual model throughout the catalog.

Model numbers progress numerically from model #1 with the largest cup diameter, to model #20C with the smallest cup diameter. Cup depths are notated with letters. “A” cups are the deepest; standard cups have no letter designation; progressively shallower cups are marked B through F.

 

  • “A” Models have very deep cups, #24 backbores, and emit a large, dark sound.
  • Models with no letter designation have deep cups, #10 backbores, and produce a rich, full, clear tone.
  • “B” Models have medium deep cups, #7 backbores, and have a full, Teutonic tone with great volume.
  • “C” Models have medium cups, #10 backbores, and are preferred by many players that alternate between B b, C and D trumpet.
  • “D” Models have medium-shallow cups, #76 backbores, and produce a sparkling, brilliant tone, especially in the high register. Artists who continually play in the extreme high register use them to advantage.
  • “E” Models have shallow cups, #117 backbores, and are designed for use on soprano and piccolo trumpets. Also preferred by extreme high register players.
  • “F” Models have extra-shallow cups, #76 backbores, and are also preferred by extreme high register players.
  • “V” Models have V style cups. “V” designates a very deep cup, #20 throat, and #25 backbore; “MV” designates a medium deep cup, #25 throat, and #25 backbore; “SV” designates a shallow cup, #25 throat, and #25 backbore.
  • “W” Models have a wide, cushion rim for soft, thick lips.

Selecting a Mouthpiece

https://www.bachbrass.com/application/files/7015/3988/1841/mouthpiece-diagram.jpg

A mouthpiece consists of the rim, cup, throat, and backbore. Bringing these various components into proper relationship constitutes the art of superior mouthpiece production.
In choosing a special combination of rim, cup, throat and backbore designs, consider the effects of each.

When selecting a mouthpiece, a brass instrumentalist should choose one with a solid, compact tone of large volume. A carefully selected Bach mouthpiece can help improve a player’s embouchure, attack, tonguing and endurance.

Professional musicians and advanced students prefer the musical results of large mouthpieces, such as the Bach 1B, 1C, 11 ⁄ 4C, 11 ⁄ 2B, 11 ⁄ 2C, 21 ⁄ 2C, 3C, which provide a maximum volume of tone with the least amount of effort. By opening up the lips so that they do not touch, the larger mouthpiece produces a clearer, purer tone. The large cup diameter also allows a greater portion of the lip to vibrate, producing a larger volume of tone, and keeps a player from forcing high tones by encouraging the correct functioning of the lip muscles. However, a student may find a medium-sized mouthpiece suitable.

Do not select a certain mouthpiece because another player uses it. Because no two players have the same lip or tooth formation, what is perfect for one may be entirely unsuitable for the other. Bach produces many different models so that each player can find the best mouthpiece for their individual embouchure.