Audio-Technica ATW-T1001 System 10 UniPak body-pack transmitter 2.4 GHz
Quantity: | |
If we do not have the full amount that you ordered of this item: |
|
|
|
Add to Cart |
Free Economy Standard Ground Shipping on purchases over $ 50.00
* some exceptions (see our shipping policy)
* some exceptions (see our shipping policy)
Audio-Technica ATW-T1001 System 10 UniPak body-pack transmitter, 2.4 GHz
Body-pack transmitter with cW-style locking 4-pin connector.
Body-pack transmitter with cW-style locking 4-pin connector.
- Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
- Operates in the 2.4 GHz range – completely free from TV interference
- Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility
- Up to five chassis (ten receiver units) can be linked and used simultaneously
- Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
- Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
- Automatic frequency selection for seamless, interference-free operation
- Extremely easy operation with instantaneous channel selection, sync, and setup
- Three levels of diversity assurance: frequency, time & space
- Ground-lift switch helps eliminate audible hum caused by ground loops
Body Pack | |
---|---|
RF Power Output | 10 mW |
Battery Life | >7 hours (alkaline) Depending on battery type and use pattern |
Battery Type | Two 1.5V AA not included |
Dimensions | 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D |
Input Connections | Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
Net Weight | 100 grams (3.5 oz) without batteries |
Spurious Emissions | Following federal and national regulations |